Bolt to Number Plate Reversing Camera | CAM071P
This is the bolt version number plate reverse camera. Simply drill a small hole on the underside of your number plate ledge for the bolt of the camera to fit through. Then fasten to vehicle with the special split type nut provided. The result is a very small camera that is quite hard to even see! We have had this made by the same factory that makes our upgraded brake light cameras. Using their high quality PC4089 700TVL sensor and fully glass composite lens combination.
This is the bolt version number plate reverse camera. Simply drill a small hole on the underside of your number plate ledge for the bolt of the camera to fit through. Then fasten to vehicle with the special split type nut provided. The result is a very small camera that is quite hard to even see! We have had this made by the same factory that makes our upgraded brake light cameras. Using their high quality PC4089 700TVL sensor and fully glass composite lens combination.
You have two connector options when ordering depending on the connector type used by your monitor display. If you are running to a stereo headunit then order the Phono/RCA type, if you have a 4 pin monitor then order the 4 pin connectors.
The reversing camera is waterproof up to IP68, please note that the wiring connections must be inside due to an inline power regulator being placed on the cable (see image above - red arrows). This isn't usually an issue since the camera cable is designed to go straight in to the vehicle.
There is a trigger loop which can turn guidelines on/off.
Camera works on 12V. If you are using one of our 4 pin monitors then these will supply the camera with 12V even if you install on a 24V vehicle.
PDF Instructions
We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance.
 Click preview image to download the PDF file | General 4 Pin Camera Installation Guide This guide includes adapting the 4 pin reversing cameras to phono RCA in applications such as stereo headunits. |
Technical Specs
Please see the technical specifications for the product below:
Image device:- PC4089 CMOS sensor
Effective pixels: 976(H) x 592(V)
Resolution: 700 TVL
Selectable guidelines
PAL format
IP rating: Ip68
Lens angle: 150° diagonal
Minimum illumination 0.1 Lux
Video output: 1.0VP-P.75Ohm
Power supply: DC12V
Operating Temperature: -20°C to +70°C
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders. £3.95.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM). £6.50.
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM). £7.99.
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.