Reversing Camera Kit for Citroen Relay/Fiat Ducato/Peugeot Boxer (2006-Present), and Vauxhall Movano (2022+) to fit Brake Light | PM39BLA
Our 7" rear view mirror monitor + brake light reversing camera kit to fit the 2006 onwards Fiat Ducato, Citroen Relay, and Peugeot Boxer vans, as well as 2022 onwards Vauxhall Movano vans.
Introduction to our Fiat Ducato, Peugeot Boxer, Citroen Relay 2006 - Present, and Vauxhall Movano 2022+ Brake Light Reversing Camera Kit with 7" Mirror Monitor
Mirror monitor brake light reversing camera kit to fit Fiat Ducato, Peugeot Boxer, and Citroen Relay vans built 2006 to present, as well as Vauxhall Movano 2022+. Factory look, tidy install. Top spec image sensor and monitor. Attach to windscreen or clip over mirror types. 2 year guarantee.
This brake light reversing camera fits the following vans:
Fiat Ducato 2006 - Present
Peugeot Boxer 2006 - Present
Citroen Relay 2006 - Present
Vauxhall Movano 2022 - Present
This camera has the following advantages :
High Resolution Monitor Display - Our 7 inch mirror monitor display gives a good quality image thanks to it's 800x480 pixel digital hi-res LCD panel.
Great Camera Image Quality - We don't settle for the base spec when it comes to this brake light camera. We have the 4089 700tvl image sensor fitted, which is paired with a top quality all-glass composite lens. The image sensor is one of the most important components for ensuring a colourful, sharp, and high dynamic image. We select all glass lenses instead of cheaper glass-plastic composites, because over time plastic containing lenses would fade from UV damage. No such issue with our all-glass lenses.
Choice of Mounting Method - New for 2024. We were often asked by customers who wanted to fit this style of camera if we could produce a version that would fit by screwing from the front of the camera instead of bolting from the rear - especially, if the customer has a Van Conversion Motorhome, where access to rear bolts is difficult. If you do prefer the bolt from rear method, we have kept this as an option, please use the selection box above when ordering.
IP68 Waterproof Protection - This reversing camera is rated to IP68 water/dust ingress protection. This will keep the camera protected in even the worst wet and stormy weather the Great British weather can throw at it, or indeed on your trips across the continent.
130°(H) / 160°(D) Ultra Wide Angle - Due to the external lens fitted to this camera, you are able to have a greater field of view, which is very helpful when reversing. External lenses can achieve wider field of view compared to those mounted behind a glass cover.
2 Year Guarantee - We believe that our brake light reversing cameras come from the best factory, the factory is so sure of their own product that they fully support our highly respected two year guarantee. We find the fault rate very low from them, but should anything happen in your first two years of ownership, we will provide a replacement.
IR Night Vision - This camera is fitted with IR LED's that activate when it becomes dark. IR light is beyond the visible spectrum of the human eye, so you won't be blinding anyone behind you with light. The camera will see it, and use it to see obstacles behind your van when it is dark. Another bonus about our external lens is not having the IR LED's behind a glass lens cover. This means you get a really good contrast at night time, with none of the haziness sometimes seen with glass lens cover versions.
Maintains a Tidy Factory Look - This brake light reverse camera was designed to fit perfectly where the OEM brake light used to be. If you didn't tell anyone, most people would assume it was a factory addition. The brake light works just as well as the original, in fact you are actually using the original light strip.
The camera has an LED strip built into the brake light, this is connected to a socket, your old plug may insert into this, however, because there have been a few types of plug/socket over time it might be necessary to solder/crimp the wires instead, a plug that terminates in red/black bare wires is provided to help you do this.
*Please note that we currently have two types of camera, one with guidelines and one without. If you have a preference as to which we supply please leave a customer note during checkout.
A vloggers video about fitting the brake light reversing camera kit
Have a watch of a vloggers YouTube video below, which shows his install to his van conversion. Apologies if the thumbnail has click bait titles that change from time to time.
Tidy Factory Look Fit
The photo below was of my father's old van conversion motorhome. He chose the bolt from the rear slimline version for his motorhome. If we had the dual lens version at the time of fitting, he would have had that instead.
Choose your preferred mirror monitor mounting option :
- Have a mirror? Choose our clip-over mirror option, we will supply you with a rear view mirror monitor that clips over your existing interior mirror.
- Don't have a mirror but have a twist type hexagonal shaped metal mounting plate/button on the windscreen for one? (usually hidden behind a plastic trim/cover. Then choose the ACCMB2+MP35 swan neck bracket option, we will supply you with our MP35 (Mounting Plate 35) and Swan neck bracket, these will secure to the hexagonal shaped button and fix to the back of the mirror monitor (which we will provide with screw holes on the rear for the bracket to screw in to. This type of mounting plate is most commonly found on later model Ducato, Boxer and Relay Vans. Download the PDF fitting instructions for attaching MP35 to the hexagonal shaped windscreen plate here.
- Don't have a mirror but have a slide down type metal mounting plate/button on the windscreen for one? then choose the ACCMB7 swan neck bracket option. We will supply you with our swan neck bracket compatible rear view mirror monitor + the swan neck bracket designed to fit to the windscreen slide type metal mounting plate.
- Don't have a mirror and don't have a metal button on the windscreen? Choose our ACCMB2 + Button + Glue option, we will supply you with the bracket compatible monitor, a Ford Button to bond to the windscreen, Loctite 319 windscreen button adhesive to bond the button up, as well as full instructions on how to mount a windscreen button with Loctite 319 adhesive. We have researched videos, reviews, and manufacturer recommendations to provide the best instructions available to get the job done correct, first time.
Installation and Power Options:
- Easy installation with various power options that plug in to a socket on the monitors wiring harness/loom.
- Single power connection powers the entire system.
- Standard hardwiring ALWAYS included even when adding the additional connector options.
- Choose a lighter plug for the easiest plug and play solution. Some customers order this just for testing purposes before using one of our hardwiring options (fuse tap or bare wire) afterwards.
- Choose one of our fuse taps for an easy hard wire installation. We have had them designed so that one end plugs in to the monitor power socket on the end of the wiring harness, whilst on the other side of the 200cm lead has a mini blade or a standard blade fuse tap aka piggyback fuse holder, as well as a chassis earth/ground terminal fixing (find a screw/bolt connected to bare chassis and fix to this). See our downloadable PDF instructions on how to install a fuse tap/piggyback fuse holder to your vehicles fusebox.
For more information including main reversing camera kit instructions, and monitor instructions, please click the tab for PDF instructions. If you would like any information/questions that may not be present, please contact us.
Power Connection Options
You have the option to add additional leads that plug into a DC socket on the monitor wiring harness. You will always be supplied with the standard power wire, which gives you a red wire and a black wire to solder or crimp to a power supply.
On the drop-down menu you will notice there are two selectable options: one to add a lighter plug, and one for a fuse tap. Scroll down for details on each option.
Lighter Plug
Selecting this option adds an additional lighter plug lead, which attaches to a socket on the end of the 300cm monitor wiring loom/harness. Some customers choose this option simply to test their new kit before hardwiring it permanently.
View full details of this power option (opens in new tab)
Fuse Tap (Mini Blade or Standard Blade)
Selecting this option adds an easy-wire fuse tap power lead with a built-in earth terminal connector.
We designed and had these products produced in 2023 to allow customers to hardwire a reversing camera system easily, with minimal tools required. Fuse taps are already popular for dash cam installations, so we adapted them specifically for reversing camera kits.
Unlike many fuse taps, our easy-wire kits come supplied with 2 metres of twin cable (power and earth) already attached. The wires can be separated if you need to route the earth away from the fuse box.
Choose a fuse position that is live only when the ignition is switched on. Remove the original fuse and place it into the spare slot on the fuse tap. The correct rated fuse for the camera system is already installed. Insert the fuse tap into the fuse box and secure the earth terminal to a suitable chassis bolt or screw.
The mini blade fuse is the most commonly used type on modern vehicles.
View full details of this power option (opens in new tab)
Standard blade fuse taps are still very common, even on newer vehicles.
Technical Specification
Vehicle Mirror Monitor
7” Diagonally Measured Colour LCD screen
Power supply: 12V/24V
Power Consumption: 7.5W Max
Digital Screen Resolution: 800 x3(RGB)x480
2x 4 pin Inputs
PAL/NTSC/AUTO
Reversing Camera
Sensor: 1/3" PC4089 CMOS
Effective Pixels: 976(H) x 592(V)
TV line: 700 TVL
Lens: 1.9mm
Min illumination: 0.0 LUX (IR LED on)
IR LEDs: 8 pcs
Night vision: 10m
Waterproof: IP68
View angle: V 85 degrees, H 130 degrees D 160 degrees
Camera lens adjustment: 20 degrees up and down
Voltage: 12 volts
Current consumption: 150mA
Operating temperature: -20 to 70 degrees C
Guideline: Optional (some have a trigger wire to select)
Certificates: FCC, CE, E-mark, RoHS
Connector: 4 pin aviation
PDF Instructions
We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance.
 Click preview image to download the PDF file | For all of our cabled reversing camera kits Our main 4 pin reversing camera kit instructions. We prefer 4 pin screw locking connector cables in our kits for numerous reasons (no canbus issues, stable voltage, ability for always on, reliability, and heavy duty connectors). This downloadable PDF file will give you all the advice you will need. Some of our cameras will come with extra specific guidance or manuals to help that specific install. |
 Click preview image to download the PDF file | Mirror Monitor Instructions If you choose a mirror monitor kit this monitor will be supplied. It is a great monitor with lots of menu options, lovely colour, adjustable guidelines, and good viewing angle range. |
If you are ordering the Mini Bade or Standard Blade Fuse Tap power option, then please see the further instruction sheet below dealing with this time saving connection method.
 | Instructions for fitting Fuse Taps / Piggyback fuse holders for power supply Our guide on how to correctly install a piggyback fuse holder tap to power a reversing camera system from the fuse box. |
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Northern Ireland
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. If your order is over £135 ex VAT, you may find that duty (tax) is due from the shipping company. If you are a business in Northern Ireland, please provide an EORI number and/or UKIMS number in the customer notes box of the checkout, which we will use when booking in. This is because of the new Windsor Framework introduced in 2025.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.
