Renault Master, Vauxhall Movano, Nissan NV400 Brake Light Reversing Camera Kit | PM59BLF
High resolution reversing camera system with 5 inch display to fit the brake light on Renault Master, Vauxhall Movano, and Nissan NV400 vans. Two year guarantee, upgraded image sensor, high quality and durable display, fast delivery from the leading UK reversing camera specialists.
Introducing our Vauxhall Movano, Nissan NV400, and Renault Master Reversing Camera Kit to fit Brake Light with 5" Display
Brake light reversing camera kit, designed to increase your safety, giving you greater rear visibility, whilst maintaining the factory appearance. Easy to install, high resolution, great image quality, durable, supported with a two year guarantee from the reversing camera specialists.
This brake light reversing camera fits the following vans:
Renault Master 2010 - Present
Nissan NV400 2010 - Present
Vauxhall Movano 2010 - 2022
This reversing camera system has the following advantages :
High Resolution Image Quality - Our compact 5 inch stand/dash mount monitor display still packs a punch thanks to it's 800x480 pixel digital hi-res LCD panel. This resolution can handle even the highest resolution of traditional CVBS signal reversing cameras (CVBS signal still makes up 95%+ of all existing reversing camera systems). We don't settle for the base spec when it comes to the brake light camera either. We have the 4089 700tvl image sensor fitted, which is paired with a top quality all-glass composite lens. The image sensor is one of the most important components for ensuring a colourful, sharp, and high dynamic image. We select all glass lenses instead of cheaper glass-plastic composites, because over time plastic containing lenses would fade from UV damage. No such issue with our all-glass lenses.
Compact Size Reversing Camera Display- This monitor is usually selected by 4x4, motorhome and van owners in vehicles where dashboard space may be too tight to fit the more commonly fitted 7 inch sized displays.
IP68 Waterproof Protection - This reversing camera is rated to IP68 water/dust ingress protection. This will keep the camera protected in even the worst wet and stormy weather the Great British weather can throw at it, or indeed on your trips across the continent.
Increases Safety Whilst Reversing - Most importantly, this camera will improve visibility to the rear of your vehicle, which helps improve safety to your property and other road users. With around 25% of all collisions occurring in the UK when in reverse, this camera will help reduce the risk.
130°(H) / 160°(D) Ultra Wide Angle - This reversing camera has a wide angle lens fitted to give the greatest visibility around the rear of the vehicle when manoeuvring.
2 Year Guarantee - We believe that our brake light reversing cameras come from the best factory, the factory is so sure of their own product that they fully support our highly respected two year guarantee. We find the fault rate very low from them, but should anything happen in your first two years of ownership, we will provide a replacement. The monitor should last a very long time as well without any issue. We guarantee it to be free from faults for two years. After two years we are able to offer low cost repairs to keep your system in good condition and avoid extra time or expense installing all new components. We also keep good stock of spare parts such as wiring harnesses should you decide to take the monitor out of the vehicle with you when you sell your vehicle but leave the wiring where it is.
IR Night Vision - This camera is fitted with IR LED's that activate when it becomes dark. IR light is beyond the visible spectrum of the human eye, so you won't be blinding anyone behind you with light. The camera will see it, and use it to see obstacles behind your van when it is dark.
Alternative bracket options - The monitor has a rear channel that allows our alternative monitor brackets to be installed. This choice includes quick release, ceiling mount, heavy duty, and temporary suction mount brackets. You can choose to add a discounted price bracket with this monitor using the drop down selection box menu.
Maintains a Tidy Factory Look - This brake light reverse camera was designed to fit perfectly where the triangular OEM brake light used to be on the right hand side door of the van. If you didn't tell anyone, most people would assume it was a factory addition. The brake light works just as well as the original.
Additional Monitor Bracket Options
To add a discounted price additional monitor bracket to your product bundle, please see the descriptions/photos below. We also have a YouTube video showing the various bracket options below.
ACC035 - "Butterfly" Bracket option
So called because the base looks like a pair of butterfly wings. Fitted with an adhesive pad on the base, peel the protective layer off and stick to your clean dashboard. Additional screws can be used if you feel it needs reinforcement. The square nut fits in to the channel of your monitor, whilst there is a screw to the rear of the bracket that will then screw in to the square washer until it locks the two together.
ACC041 Quick Release Bracket option
The quick release bracket is one of the most popular bracket options. The bracket has a removable mounting plate that attaches to the rear channel of the monitor. This plate can then slide in to the bracket that is mounted to the dashboard and locks. To release, simply pull back the thumb switch at the rear, then slide the monitor up and out. Our monitors have disconnect points around a foot away from the monitor to allow it to disconnect. A bracket that makes initial install a little quicker, as well as allowing more adjustability in positioning of the display. Adhesive pad base for sticking to clean dashboard with bendable feet.
ACC705B - Heavy Duty Rear Mount Bracket Option
The most sturdy of all of our rear mounted dash mounts, all metal design. Monitor slides on to the bracket, which has a rear adjustment rotational wheel to lock the monitor to the bracket. Self adhesive base, with bendable "feet" for curvy dashboards. You can add screws if required.
ACC038 - Suction Mount Bracket Option
Only designed for temporary mounting eg. moving a monitor from one vehicle to another. This bracket has strong suction, people are often shocked by how strong it is. We use these when we road test new monitors for temporary mounting. A ball joint allows for good adjustment to give the monitor the optimum viewing angle.
ACC20540 - "Banana" Ceiling Mount Swan Neck Bracket Option
The ceiling mount bracket is a very sturdy and adjustable bracket mount for the monitor in this kit. Two screws secure this to the ceiling or plastic trim of the vehicle. The other side attaches to the channel on the back of the monitor and secures with a twist of the locking wheel. Release the tension by turning the hand screw knob on the left to allow the ball joint to rotate clockwise and anticlockwise, or up/down/left/right. These have been a very popular option since they were introduced.
Power Connection Options
You have the option to add additional leads that plug into a DC socket on the monitor wiring harness. You will always be supplied with the standard power wire, which gives you a red wire and a black wire to solder or crimp to a power supply.
On the drop-down menu you will notice there are two selectable options: one to add a lighter plug, and one for a fuse tap. Scroll down for details on each option.
Lighter Plug
Selecting this option adds an additional lighter plug lead, which attaches to a socket on the end of the 300cm monitor wiring loom/harness. Some customers choose this option simply to test their new kit before hardwiring it permanently.
View full details of this power option (opens in new tab)
Fuse Tap (Mini Blade or Standard Blade)
Selecting this option adds an easy-wire fuse tap power lead with a built-in earth terminal connector.
We designed and had these products produced in 2023 to allow customers to hardwire a reversing camera system easily, with minimal tools required. Fuse taps are already popular for dash cam installations, so we adapted them specifically for reversing camera kits.
Unlike many fuse taps, our easy-wire kits come supplied with 2 metres of twin cable (power and earth) already attached. The wires can be separated if you need to route the earth away from the fuse box.
Choose a fuse position that is live only when the ignition is switched on. Remove the original fuse and place it into the spare slot on the fuse tap. The correct rated fuse for the camera system is already installed. Insert the fuse tap into the fuse box and secure the earth terminal to a suitable chassis bolt or screw.
The mini blade fuse is the most commonly used type on modern vehicles.
View full details of this power option (opens in new tab)
Standard blade fuse taps are still very common, even on newer vehicles.
PDF Instructions
We aim to provide as much information as possible to assist with both the installation and use of our equipment (something we here is very rare nowadays). If you require any further assistance with any aspect of the fitment then please contact us. Also, if you feel anything could be added to our instructions or a sticker produced for the box to assist in guidance, please let us know. We get better with your assistance.
 Click preview image to download the PDF file | For all of our cabled reversing camera kits Our main 4 pin reversing camera kit instructions. We prefer 4 pin screw locking connector cables in our kits for numerous reasons (no canbus issues, stable voltage, ability for always on, reliability, and heavy duty connectors). This downloadable PDF file will give you all the advice you will need. Some of our cameras will come with extra specific guidance or manuals to help that specific install. |
 Click preview image to download the PDF file | MON5001 5 inch Vehicle Monitor Display Reversing Camera Monitor Fitting Instructions Our guide to the compact 5 inch monitor, it's fitting and menu settings. |
Technical Specification
5" Monitor Display
Screen Ratio : 16:9
Backlight Luminance : LED, 200 cd/㎡
Resolution : 800 x RGB x 480
Compatible System : NTSC & PAL (automatically)
OSD Control : Color, Brightness, Contrast, Volume, Language (English, Deutsch, French, Spanish, Portuguese, Italian, Dutch, Simplified Chinese)
View Angle : Horizontal L(70) R(70), Vertical UP(50) DOWN(70)
Image Reversion : UP/Down and Left/Right
Power Requirement : 12V DC (12–24V DC optional)
Power Consumption : 5W
Storage Temperature : -30°C to 80°C
Working Temperature : -20°C to 70°C
Size : 141 x 103 x 25 mm
Weight : 418g
Key Colour : Black with blue light
AV Inputs : 3-way video input, 2-way audio input
Number of Triggers and Display : 3 triggers
Other Features : With AV-IN, Built-in Speaker
Renault Master, Vauxhall Movano, Nissan NV400 Brake Light Reversing Camera
Image Sensor : 1/3" colour Super CMOS
Effective Pixels : 976(H) x 592(V)
Resolution : 700TVL
IR LED : 8pcs
Minimum illuminations : 0.1 Lux (with IR)
Lens Angle : 160 degrees
Waterproof : IP68
AGC : Auto
Signal to noise ratio : Better than 48dB
White balance : Auto
Electronic Shutter : Auto
Backlight compensation : Auto
Power Supply : DC12V
Operating Temperature : -20C to 70C RH95% MAX
Storage Temperature : -40C to 80C RH95% MAX
Mainland UK Shipping
We have three postage options to select from during checkout (on larger items eg kits there will be two options):
Royal Mail Tracked - Smaller / Lighter weight orders. This will be sent via Royal Mails Tracked Service. They will send emails/SMS to inform you of the tracking events. This option won't be shown for heavier weight orders.
DPD 2 Day. Small or large orders. This will be sent with DPD Local and should arrive within two working days (if you place the order before 12:30PM).
DPD Next Day. Small or large orders. This will be sent with DPD Local and should arrive the following working day (if you place the order before 12:30PM).
Highlands and Islands UK Shipping
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. The prices charged are identical to mainland UK. Small orders will be sent via the post, larger orders via Parcel Force.
Northern Ireland
We offer a 2-3 day service fulfilled with either Royal Mail Post, or Parcel Force. If your order is over £135 ex VAT, you may find that duty (tax) is due from the shipping company. If you are a business in Northern Ireland, please provide an EORI number and/or UKIMS number in the customer notes box of the checkout, which we will use when booking in. This is because of the new Windsor Framework introduced in 2025.
Outside of the UK Shipping
We shop around when selecting the best method for Europe (we avoid the cheap budget couriers due to parcels being lost). Southern Ireland is always sent via DPD. Other countries will usually be either Parcel Force, UPS, or Fedex. Please note that we require a phone number for international deliveries. Also if you are a company in Europe, a VAT number or EORI number will help speed up customs.
We remove the UK VAT (Tax) when any country other than the UK is selected in the shopping basket or checkout. From this point all prices on the site drop down to exclude VAT. If you are from the Channel Islands, please select Jersey / Guernsey from the country list in order to remove UK sales Tax.
60 day "Change of Mind" policy
We understand that for whatever reason you may need to return your purchase. We provide a 60 day opportunity for you to do just that. Simply give us an email or a phone call to let us know it is due back. You are responsible for the shipping back to us but you will receive a full refund including the original shipping we charged you for your order. We recommend getting a signed for or proof of postage when posting back to us.
All we ask is that you return the items in the condition they were sent in, with the packaging present. You are welcome to have temporarily tested the product and unravelled things, but if you have cut wires, soldered, glued, installed and used for a while then this wouldn't be suitable for returns under the change of mind policy.
